Top Grades
Home - Steel plate - S275ML steel

S275ML steel

EN10113S275ML steel plate/sheet,EN10113 S275ML steel plate/sheet, under EN standard, we can regard S275ML steel plate/sheet for Fine-grain structural steels, thermomechanically rolled steel.

EN10113 S275ML is a technical delivery conditions for thermomechanical rolled weldable fine grain structural steels.It is according to EN10113-3 standard.S means the structural steel, M means the delivery condition.Capital letter L for the quality with specified minimum values of values of impact energy at temperature not lower than -50 degree.
 

  S275ML
EN 10113-3
Number:1.8819
Comparision of steel grades
DIN TStE 285 TM
UNI 7382 Fe E 275 KTTM
BS 4360 -
ASTM -

Chemical Composition of EN S275ML steel,by %

Grade C
max
Si
max
Mn
max
P
max
S
max
N
max
AL
max
Nb
max
V
max
Ti
max
Cr
max
Ni
max
Mo
max
Cu
max
CEV
max
S275ML 0.13 0.50 1.5 0.025 0.02 0.015 0.02 0.05 0.08 0.05 0.30 0.3 0.10 0.55 0.38

Mechnical Properties of EN S275ML steel

Temperature -50 -40 -30 -20 -10 0 20
Notch impact test. Min. absorbed energy 27 31 40 47 51 55 63

Nominal thickness(mm) to 16 16-40 40-63 63-80 80-100 100-120
ReH-Minimun yield strength(Mpa) 275 265 255 245 245 240

Nominal thickness(mm) to 40 40-63 63-80 80-100 100-120
Rm-Tensile strength(Mpa) 370-530 360-520 350-510 350-510 350-510
Nominal thickness(mm) -
A-Minimum elongation
Lo=5,65√So(%)
24